Specifications of Ceramics Syringes

Standard μL class syringe specification
Product model no.	200C-60	2001-60	2002-60	2005-60
Displacement/μL	50	100	250	500
Stroke/mm	60	60	60	60
Plunger diameter/mm	1.02	1.45	2.3	3.25
Plunger material	SUS316	SUS316	SUS316	SUS316
Life cycles/million	3	3	3	3
Accuracy	2%	2%	2%	2%
CV (Coefficient of variation)	1.5%	1.5%	1.5%	1.5%
Operating pressure/MPa	0.3	0.3	0.3	0.3
Working medium	Water, oil, weak alkalis, etc. (please contact us to confirm specifics)
Weight/g	55	70	70	75
Dimensions/ mm×mm×mm	18.2×20× (120~180)	22×20× (119~179)	22×20× (119~179)	22×20× (119~179)

60mm Stroke syringe parameters
Product model no.	2010-60	2025-60	2050-60	201A-60
Displacement/μL	1	2.5	5	10
Stroke/mm	60	60	60	60
Plunger diameter/mm	4.6	7.3	10.3	14.6
Plunger material	Engineering ceramics
Life cycles/million	2	2	2	2
Accuracy	2%	2%	2%	2%
CV (Coefficient of variation)	1.5%	1.5%	1.5%	1.5%
Operating pressure/MPa	0.3	0.3	0.3	0.3
Working medium	Water, oil, weak alkalis, etc. (please contact us to confirm specifics)
Weight/g	90	90	115	170
Dimensions/ mm×mm×mm	20×21× (129~189)	22×23× (129~189)	24×25× (129~189)	28×29× (129~189)

Note: Please kindly reach out to our sales team for design and specification final clarification and confirmation.

Reasons to Buy Keyto Ceramics Syringes

01

Available in eight syringe volumes

Available in eight syringe volumes from 50uL to 10mL.
02

Extremely high and stable dosing aspiration and dispense accuracy

Extremely high and stable dosing aspiration and dispense accuracy over the life cycle of the pump. The following table shows the CV when tested with deionized water as the medium.
03

Full stroke

Full stroke: 60mm.
04

Maintenance-free

Advanced zirconia ceramic plunger machining technology, rigorous inspection procedures, and unique sealing solutions that ensure maintenance-free over the life cycle of the ceramics syringes.
Aspiration and dispense volume as a percentage of total volume
CV
Accuracy
≥2%
＜1.5%
＜2.0%
05

Good chemical resistance and high wear resistance

Good chemical resistance and high wear resistance of the materials of the components in contact with the reagents:
(1)Syringe chamber material: POM(Nominal), Teflon (PTFE) and other polymer materials are optional on request.
(2)Plunger material: zirconia ceramic, stainless steel metal are optional.